3-Averaging Assumptions

All right look, that was not rocket science, that seemed reasonable. But the important question to ask, really important question to ask is, why was that solution intuitive for you? Why did you say, you know what, I'm going to take a little average in order to get rid of some of the noise? What assumptions are you making about pictures, and by the way, about noise, in coming up with that answer. All right, so a little thought we come up with, you're making a couple of key assumptions. The first assumption is that the real value of a pixel is probably similar to the values nearby. Okay. Otherwise, why would I use the pixels nearby in order to try to figure out what my real value was? So okay that was assumption number one. The other thing that you're assuming. And for those of you who know a little, just a little about that problem, though the math etc. You're basically assuming that each noise that's been added to each pixel is independent of the noise that's been added to all the other pixels. And so what that means is if I take the average of the noise, that's going to tend to, I'm going to assume zero. That is that sometimes it'll be up, and sometimes it'll be down, and if I take the average around them, that that will be zero. So if I have pixels nearby having about the same value are related and the noise is independent, then the average is the right thing to do. 

Well, this is one of these funny things. Hm. Well, these certainly true. Okay. Yes, I could remove the noise if you told me what the noise is. But nobody ever tells you what the noise is. Because if they did, they would have removed it in the first place. So you don't know what the noise is. You just know the statistics of the noise. And then, here is one that's interesting. False, because additive noise destroys information. Well, if you have just plain addition, and the addition works, then that statement is not true. And so, C would be wrong. But, suppose you have a limit between 0 and 255 or even 0 to 1. If your noise pushes you beyond the limits and you clip. You've lost that information. So sometimes when you add noise you get these nonlinearities. But in general, we can't remove the noise because we don't know what the noise was. If we did, we could just subtract it. 

Last modified: Saturday, 3 February 2024, 8:51 AM